IS01の/proc

この記事は2年以上前に書いたものです。
そのため情報が古い可能性があります。ご了承ください。m(_ _)m

の一部。

$ ls /proc
msm_v4l2
msm_pm_stats
asound
binder
mtd
dri
partitions
diskstats
crypto
yaffs
kpageflags
kpagecount
kmsg
version
uptime
stat
meminfo
loadavg
interrupts
devices
cpuinfo
cmdline
locks
filesystems
slabinfo
vmallocinfo
zoneinfo
vmstat
pagetypeinfo
buddyinfo
config.gz
kallsyms
modules
timer_list
iomem
ioports
execdomains
msm8k_audio_dev_ctrl
msm8k_amr_in
msm8k_amr
msm8k_voice
msm8k_dtmf
msm8k_mp3
msm8k_aac_in
msm8k_aac
msm8k_pcm_in
msm8k_pcm
cpu
scsi
misc
fb
wakelocks
irq
sys
bus
tty
driver
fs
sysvipc
net
mounts
self
1
2
・・・ pidが続く
$ cat /proc/version
Linux version 2.6.29-perf (nbproj@TG721404) (gcc version 4.2.1) #1 PREEMPT Wed Aug 4 16:27:08 JST 2010
$ cat /proc/cpuinfo
Processor       : ARMv7 Processor rev 2 (v7l)
BogoMIPS        : 664.53
Features        : swp half thumb fastmult vfp edsp neon
CPU implementer : 0x51
CPU architecture: 7
CPU variant     : 0x0
CPU part        : 0x00f
CPU revision    : 2

Hardware        : SHARP DECKARD
Revision        : 0000
Serial          : 0000000000000000
$ cat /proc/cpu/alignment
User:           0
System:         0
Skipped:        0
Half:           0
Word:           0
DWord:          0
Multi:          0
User faults:    4 (signal)

Snapdragon (processor) – Wikipedia, the free encyclopedia
によると、QSD8250 だそうです。

$ cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00b00000 00020000 "boot"
mtd1: 00500000 00020000 "cache"
mtd2: 00b00000 00020000 "recovery"
mtd3: 00180000 00020000 "splash"
mtd4: 00b40000 00020000 "ipl"
mtd5: 10000000 00020000 "system"
mtd6: 00300000 00020000 "log"
mtd7: 06420000 00020000 "userdata"
$ cat /proc/partitions
major minor  #blocks  name

  31        0      11264 mtdblock0
  31        1       5120 mtdblock1
  31        2      11264 mtdblock2
  31        3       1536 mtdblock3
  31        4      11520 mtdblock4
  31        5     262144 mtdblock5
  31        6       3072 mtdblock6
  31        7     102528 mtdblock7
 254        0   33554432 stheno
 179        0    3870720 mmcblk0
 179        1    3670016 mmcblk0p1
 179        2     200704 mmcblk0p2
$ cat /proc/meminfo
MemTotal:         158520 kB
MemFree:            7848 kB
Buffers:             188 kB
Cached:            15892 kB
SwapCached:            0 kB
Active:            56304 kB
Inactive:          69480 kB
Active(anon):      50080 kB
Inactive(anon):    61748 kB
Active(file):       6224 kB
Inactive(file):     7732 kB
Unevictable:         296 kB
Mlocked:               0 kB
SwapTotal:             0 kB
SwapFree:              0 kB
Dirty:                44 kB
Writeback:             0 kB
AnonPages:        110016 kB
Mapped:            13356 kB
Slab:               7052 kB
SReclaimable:       1496 kB
SUnreclaim:         5556 kB
PageTables:         7368 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:       79260 kB
Committed_AS:    1877804 kB
VmallocTotal:    1327104 kB
VmallocUsed:      114816 kB
VmallocChunk:    1131516 kB

154MB?

$ dmesg
<5>[    0.000000] Linux version 2.6.29-perf (nbproj@TG721404) (gcc version 4.2.1) #1 PREEMPT Wed Aug 4 16:27:08 JST 2010
<4>[    0.000000] CPU: ARMv7 Processor [510f00f2] revision 2 (ARMv7), cr=10c5387f
<4>[    0.000000] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
<4>[    0.000000] Machine: SHARP DECKARD
<6>[    0.000000] Partition (from atag) boot -- Offset:389 Size:58
<6>[    0.000000] Partition (from atag) cache -- Offset:3e1 Size:28
<6>[    0.000000] Partition (from atag) recovery -- Offset:409 Size:58
<6>[    0.000000] Partition (from atag) splash -- Offset:461 Size:c
<6>[    0.000000] Partition (from atag) ipl -- Offset:46d Size:5a
<6>[    0.000000] Partition (from atag) system -- Offset:4c7 Size:800
<6>[    0.000000] Partition (from atag) log -- Offset:cc7 Size:18
<6>[    0.000000] Partition (from atag) userdata -- Offset:cdf Size:321
<4>[    0.000000] Memory policy: ECC disabled, Data cache writeback
<7>[    0.000000] On node 0 totalpages: 59392
<7>[    0.000000] free_area_init_node: node 0, pgdat 80522b80, node_mem_map 80661000
<7>[    0.000000]   Normal zone: 464 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 58928 pages, LIFO batch:15
<6>[    0.000000] allocating 34033664 bytes at 80836000 (20836000 physical) for mdp pmem arena
<6>[    0.000000] allocating 29360128 bytes at 8404a000 (2404a000 physical) for adsp pmem arena
<6>[    0.000000] allocating 8388608 bytes at 85d00000 (25d00000 physical) for gpu1 pmem arena
<6>[    0.000000] using 1843200 bytes of SMI at 2b00000 physical for fb
<6>[    0.000000] allocating 524288 bytes at 85c4a000 (25c4a000 physical) for audio
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 58928
<5>[    0.000000] Kernel command line: console=ttyMSM2,115200n8 androidboot.hardware=qcom androidboot.serialno=SSHEX007494 androidboot.wakeinfo=0 androidboot.pmicinfo=i
<3>[    0.000000] Unknown boot option `androidboot.hardware=qcom': ignoring
<3>[    0.000000] Unknown boot option `androidboot.wakeinfo=0': ignoring
<3>[    0.000000] Unknown boot option `androidboot.pmicinfo=i': ignoring
<4>[    0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
<4>[    0.000000] Console: colour dummy device 80x30
<6>[    0.000213] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000533] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>[    0.008940] Memory: 232MB = 232MB total
<5>[    0.008960] Memory: 157824KB available (4828K code, 1499K data, 160K init)
<6>[    0.009280] Calibrating delay loop... 511.18 BogoMIPS (lpj=2555904)
<6>[    0.240173] Security Framework initialized
<6>[    0.240200] DECKARD LSM module initialized
<4>[    0.240326] Mount-cache hash table entries: 512
<6>[    0.240806] CPU: Testing write buffer coherency: ok
<6>[    0.242966] net_namespace: 444 bytes
<6>[    0.243700] NET: Registered protocol family 16
<6>[    0.245586] socinfo_init: v2, id=30, ver=2.0, raw_id=640, raw_ver=2
<3>[    0.245606] qsd8x50_cfg_smc91x: invalid machine type
<6>[    0.245633] Max ACPU freq from efuse data is 998400 KHz
<6>[    0.246200] ACPU running at 768000 KHz
<6>[    0.246220] 5 scaling frequencies supported.
<4>[    0.268526] bio: create slab <bio-0> at 0
<5>[    0.271533] SCSI subsystem initialized
<6>[    0.271920] msm_i2c_probe
<6>[    0.271966] msm_i2c_probe: clk_ctl 317, 369230 Hz
<6>[    0.274473] Bluetooth: Core ver 2.15
<6>[    0.274766] NET: Registered protocol family 31
<6>[    0.274780] Bluetooth: HCI device and connection manager initialized
<6>[    0.274793] Bluetooth: HCI socket layer initialized
<6>[    0.276713] NET: Registered protocol family 2
<6>[    0.276900] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.277240] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>[    0.277413] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
<6>[    0.277493] TCP: Hash tables configured (established 8192 bind 8192)
<6>[    0.277506] TCP reno registered
<6>[    0.277680] NET: Registered protocol family 1
<6>[    0.278100] checking if image is initramfs... it is
<7>[    0.280073] Switched to high resolution mode on CPU 0
<6>[    0.280406] Freeing initrd memory: 292K
<4>[    0.282766] sh_sys_manager_probe: hw_revision 0003
<4>[    0.282786] sh_sys_manager_probe: model_type 0003
<4>[    0.282980] smd_shdiag loaded.
<6>[    0.283700] smd probe
<6>[    0.283713] smd_core_init()
<6>[    0.283773] smd_core_init() done
<6>[    0.283960] smd_alloc_channel: cid 0 fifo found; size = 8192
<6>[    0.283980] smd_alloc_channel() 'DS' cid=0
<6>[    0.284653] smd_alloc_channel: cid 1 fifo found; size = 8192
<6>[    0.284666] smd_alloc_channel() 'DIAG' cid=1
<6>[    0.285013] smd_alloc_channel: cid 2 fifo found; size = 8192
<6>[    0.285033] smd_alloc_channel() 'RPCCALL' cid=2
<6>[    0.285366] smd_alloc_channel: cid 7 fifo found; size = 32768
<6>[    0.285380] smd_alloc_channel() 'DATA1' cid=7
<6>[    0.285740] smd_alloc_channel: cid 8 fifo found; size = 8192
<6>[    0.285753] smd_alloc_channel() 'DATA2' cid=8
<6>[    0.286113] smd_alloc_channel: cid 9 fifo found; size = 8192
<6>[    0.286126] smd_alloc_channel() 'DATA3' cid=9
<6>[    0.286486] smd_alloc_channel: cid 10 fifo found; size = 8192
<6>[    0.286500] smd_alloc_channel() 'DATA4' cid=10
<6>[    0.286860] smd_alloc_channel: cid 11 fifo found; size = 32768
<6>[    0.286873] smd_alloc_channel() 'DATA5' cid=11
<6>[    0.287366] smd_alloc_channel: cid 12 fifo found; size = 32768
<6>[    0.287380] smd_alloc_channel() 'DATA6' cid=12
<6>[    0.287760] smd_alloc_channel: cid 13 fifo found; size = 32768
<6>[    0.287780] smd_alloc_channel() 'DATA7' cid=13
<6>[    0.288166] smd_alloc_channel: cid 40 fifo found; size = 8192
<6>[    0.288180] smd_alloc_channel() 'DIAG' cid=40
<3>[    0.288526] smd_alloc_channel: cid 41 does not exist
<6>[    0.288546] smd_alloc_channel: cid 42 fifo found; size = 8192
<6>[    0.288560] smd_alloc_channel() 'DAL_AQ_VID' cid=42
<6>[    0.288900] smd_alloc_channel: cid 43 fifo found; size = 8192
<6>[    0.288920] smd_alloc_channel() 'DAL_AQ_AUD' cid=43
<6>[    0.289260] smd_alloc_channel: cid 46 fifo found; size = 8192
<6>[    0.289273] smd_alloc_channel() 'DAL00' cid=46
<3>[    0.289620] smd_alloc_channel: cid 47 does not exist
<6>[    0.289633] smd_alloc_channel: cid 48 fifo found; size = 8192
<6>[    0.289653] smd_alloc_channel() 'DAL_AM_AUD' cid=48
<6>[    0.289986] smd_alloc_channel: cid 49 fifo found; size = 8192
<6>[    0.290006] smd_alloc_channel() 'DAL00' cid=49
<6>[    0.290426] smd_alloc_channel: cid 50 fifo found; size = 8192
<6>[    0.290446] smd_alloc_channel() 'DATA5_CNTL' cid=50
<6>[    0.290793] smd_alloc_channel: cid 51 fifo found; size = 8192
<6>[    0.290806] smd_alloc_channel() 'DATA6_CNTL' cid=51
<6>[    0.291013] SMD Control Port Driver Initialized.
<6>[    0.291160] smd_alloc_channel: cid 52 fifo found; size = 8192
<6>[    0.291173] smd_alloc_channel() 'DATA7_CNTL' cid=52
<6>[    0.292093] SMD: ch 2 CLOSED -> OPENING
<6>[    0.292240] SMD: ch 2 OPENING -> OPENED
<3>[    0.292820] Using very old AMSS modem firmware.
<3>[    0.292846] Using very old AMSS modem firmware.
<6>[    0.293273] SMD: ch 48 CLOSED -> OPENING
<6>[    0.293633] SMD: ch 48 OPENING -> OPENED
<6>[    0.304633] SMD: ch 43 CLOSED -> OPENING
<6>[    0.304686] SMD: ch 43 OPENING -> OPENED
<6>[    0.311986] RPC_TIME_TOD_SET_APPS_BASES:
<6>[    0.311993]       tick = 154319
<6>[    0.312000]       stamp = 2451673121
<4>[    0.312020] /nbproj/NB30/NB30_S8040/LINUX/android/kernel/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>[    0.341280] sh_sleepcheck_init() : Called.
<6>[    0.341846] sh_sleepcheck_probe() : Called.
<6>[    0.346726] ashmem: initialized
<6>[    0.348866] fuse init (API version 7.11)
<4>[    0.349320] yaffs Aug  4 2010 16:25:50 Installing.
<6>[    0.349373] msgmni has been set to 309
<6>[    0.351740] alg: No test for stdrng (krng)
<6>[    0.351806] io scheduler noop registered
<6>[    0.351820] io scheduler anticipatory registered (default)
<6>[    0.352200] msm_fb_probe:  phy_Addr = 0x2b00000 virt = 0x8f200000
<6>[    0.352800] MDP HW Base phy_Address = 0xaa200000 virt = 0x8f400000
<6>[    0.353386] primary mddi base phy_addr = 0xaa600000 virt = 0x8f06a000
<4>[    0.519506] Console: switching to colour frame buffer device 60x60
<6>[    0.564873] FrameBuffer[0] 480x960 size=1843200 bytes is registered successfully!
<4>[    0.564920] load_565rle_image: Can not open /logo.rle
<6>[    0.565360] Registered led device: lcd-backlight
<6>[    0.579853] diagfwd initializing ..
<6>[    0.580146] SMD: ch 1 CLOSED -> OPENING
<6>[    0.580160] diag opened SMD port ; r = 0
<6>[    0.580206] SMD: ch 40 CLOSED -> OPENING
<6>[    0.580220] diag opened SMD port ; r = 0
<6>[    0.580260] SMD: ch 1 OPENING -> OPENED
<6>[    0.580346] SMD: ch 40 OPENING -> OPENED
<6>[    0.580553] diagchar initializing ..
<6>[    0.580960] diagchar initialized
<6>[    0.581800] [drm] Initialized drm 1.1.0 20060810
<6>[    0.581886] msm_serial: detected port #2
<6>[    0.581973] msm_serial.2: ttyMSM2 at MMIO 0xa9c00000 (irq = 231) is a MSM
<6>[    0.582600] msm_serial: driver initialized
<6>[    0.582753] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 44) is a MSM HS UART
<6>[    0.583353] msm_serial_hs module loaded
<6>[    0.586600] brd: module loaded
<6>[    0.589840] loop: module loaded
<1>[    0.589926] pmem: pmem_setup: unable to register pmem driver(pmem_kernel_ebi1) - zero size passed in!
<4>[    0.589960] android_pmem: probe of android_pmem.5 failed with error -1
<6>[    0.590186] pmem: 1 init
<6>[    0.592040] pmem_adsp: 0 init
<6>[    0.592986] pmem_gpu0: 0 init
<6>[    0.593666] pmem_gpu1: 0 init
<6>[    0.594460] msm_tsif msm_tsif.0: remapped phys 0xa0100000 => virt 8f078000
<6>[    0.594800] msm_tsif msm_tsif.0: Configured irq 43 memory 0xa0100000 DMA 10 CRCI 10
<6>[    0.595180] tsif_init_one[0]
<6>[    0.595473] tsif tsif0: Device 245.0 attached to TSIF, buffer size 0
<6>[    0.595526] TPS65023: PMIC probed.
<6>[    0.595680] PPP generic driver version 2.4.2
<6>[    0.596413] PPP MPPE Compression module registered
<6>[    0.596433] NET: Registered protocol family 24
<6>[    0.596453] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
<6>[    0.596466] CSLIP: code copyright 1989 Regents of the University of California.
<4>[    0.597073] smc91x: not found (-16).
<4>[    0.597093] smc91x: probe of smc91x.0 failed with error -16
<6>[    0.597593] rmnet0 (): not using net_device_ops yet
<6>[    0.598046] rmnet1 (): not using net_device_ops yet
<6>[    0.598500] rmnet2 (): not using net_device_ops yet
<6>[    0.598906] Linux video capture interface: v2.00
<4>[    0.602073] Driver 'sd' needs updating - please use bus_type methods
<6>[    0.602386] SCSI Media Changer driver v0.25
<4>[    0.602540] Driver 'ch' needs updating - please use bus_type methods
<6>[    0.603006] msm_nand: phys addr 0xa0a00000 dmac 0x7
<6>[    0.603040] allocated dma buffer at ffa05000, dma_addr 2e285000
<6>[    0.603200] ONFI probe : Found a nonONFI Compliant device
<6>[    0.603266] status: e00020
<6>[    0.603273] nandid: 5590bc98 maker 98 device bc
<6>[    0.603286] Found a supported NAND device
<6>[    0.603300] NAND Id  : 0x5500bc98
<6>[    0.603306] Buswidth : 16 Bits
<6>[    0.603320] Density  : 512 MByte
<6>[    0.603326] Pagesize : 2048 Bytes
<6>[    0.603333] Erasesize: 131072 Bytes
<6>[    0.603346] Oobsize  : 64 Bytes
<6>[    0.603353] CFG0 Init  : 0xa85408c0
<6>[    0.603366] CFG1 Init  : 0x000c7442
<6>[    0.603373] ECCBUFCFG  : 0x00000203
<5>[    0.603393] Creating 8 MTD partitions on "msm_nand":
<5>[    0.603413] 0x000007120000-0x000007c20000 : "boot"
<5>[    0.611006] 0x000007c20000-0x000008120000 : "cache"
<5>[    0.614740] 0x000008120000-0x000008c20000 : "recovery"
<5>[    0.622033] 0x000008c20000-0x000008da0000 : "splash"
<5>[    0.623733] 0x000008da0000-0x0000098e0000 : "ipl"
<5>[    0.631173] 0x0000098e0000-0x0000198e0000 : "system"
<5>[    0.787453] 0x0000198e0000-0x000019be0000 : "log"
<5>[    0.790106] 0x000019be0000-0x000020000000 : "userdata"
<5>[    0.850473] UBI: attaching mtd4 to ubi0
<5>[    0.850493] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[    0.850506] UBI: logical eraseblock size:    126976 bytes
<5>[    0.850520] UBI: smallest flash I/O unit:    2048
<5>[    0.850533] UBI: VID header offset:          2048 (aligned 2048)
<5>[    0.850546] UBI: data offset:                4096
<4>[    0.898266] UBI warning: ubi_eba_init_scan: cannot reserve enough PEBs for bad PEB handling, reserved 1, need 2
<5>[    0.899066] UBI: attached mtd4 to ubi0
<5>[    0.899080] UBI: MTD device name:            "ipl"
<5>[    0.899093] UBI: MTD device size:            11 MiB
<5>[    0.899100] UBI: number of good PEBs:        90
<5>[    0.899113] UBI: number of bad PEBs:         0
<5>[    0.899126] UBI: max. allowed volumes:       128
<5>[    0.899133] UBI: wear-leveling threshold:    4096
<5>[    0.899146] UBI: number of internal volumes: 1
<5>[    0.899160] UBI: number of user volumes:     1
<5>[    0.899173] UBI: available PEBs:             0
<5>[    0.899180] UBI: total number of reserved PEBs: 90
<5>[    0.899193] UBI: number of PEBs reserved for bad PEB handling: 1
<5>[    0.899206] UBI: max/mean erase counter: 1/0
<5>[    0.899233] UBI: attaching mtd0 to ubi1
<4>[    0.899246] UBI warning: io_init: EC and VID headers are in the same minimal I/O unit, switch to read-only mode
<5>[    0.899266] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[    0.899280] UBI: logical eraseblock size:    129024 bytes
<5>[    0.899293] UBI: smallest flash I/O unit:    2048
<5>[    0.899306] UBI: VID header offset:          256 (aligned 0)
<5>[    0.899320] UBI: data offset:                2048
<5>[    0.899453] UBI: background thread "ubi_bgt0d" started, PID 599
<5>[    0.944973] UBI: attached mtd0 to ubi1
<5>[    0.944986] UBI: MTD device name:            "boot"
<5>[    0.945000] UBI: MTD device size:            11 MiB
<5>[    0.945013] UBI: number of good PEBs:        88
<5>[    0.945020] UBI: number of bad PEBs:         0
<5>[    0.945033] UBI: max. allowed volumes:       128
<5>[    0.945046] UBI: wear-leveling threshold:    4096
<5>[    0.945060] UBI: number of internal volumes: 1
<5>[    0.945066] UBI: number of user volumes:     1
<5>[    0.945080] UBI: available PEBs:             8
<5>[    0.945093] UBI: total number of reserved PEBs: 80
<5>[    0.945100] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[    0.945113] UBI: max/mean erase counter: 0/0
<5>[    0.945140] UBI: attaching mtd2 to ubi2
<4>[    0.945160] UBI warning: io_init: EC and VID headers are in the same minimal I/O unit, switch to read-only mode
<5>[    0.945180] UBI: physical eraseblock size:   131072 bytes (128 KiB)
<5>[    0.945193] UBI: logical eraseblock size:    129024 bytes
<5>[    0.945206] UBI: smallest flash I/O unit:    2048
<5>[    0.945213] UBI: VID header offset:          256 (aligned 0)
<5>[    0.945226] UBI: data offset:                2048
<5>[    0.945366] UBI: background thread "ubi_bgt1d" started, PID 607
<5>[    0.990700] UBI: attached mtd2 to ubi2
<5>[    0.990713] UBI: MTD device name:            "recovery"
<5>[    0.990726] UBI: MTD device size:            11 MiB
<5>[    0.990740] UBI: number of good PEBs:        88
<5>[    0.990753] UBI: number of bad PEBs:         0
<5>[    0.990766] UBI: max. allowed volumes:       128
<5>[    0.990773] UBI: wear-leveling threshold:    4096
<5>[    0.990786] UBI: number of internal volumes: 1
<5>[    0.990800] UBI: number of user volumes:     1
<5>[    0.990806] UBI: available PEBs:             8
<5>[    0.990840] UBI: total number of reserved PEBs: 80
<5>[    0.990853] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[    0.990866] UBI: max/mean erase counter: 0/0
<6>[    0.990913] msm_hsusb_rpc_connect: rpc connect success vers = 10001
<6>[    0.990953] msm_chg_rpc_connect: connected to rpc vers = 10001
<5>[    0.991080] UBI: background thread "ubi_bgt2d" started, PID 610
<6>[    0.991960] msm_hsusb_get_boot_mode: mode: (0)
<6>[    1.005540] msm_hsusb_get_chgen: enable: (16777216)
<6>[    1.018820] msm_hsusb_get_qxdmen: enable: (0)
<6>[    1.018840] usb_set_composition: composition set to product id = 9337
<6>[    1.018853] phy info:(513)
<6>[    1.019286] usb_probe() io=8f1f8000, irq=58, dma=ffa06000(2e4d6000)
<6>[    1.019513] Created the sysfs entry successfully
<6>[    1.019553] Created the functions sysfs entry successfully
<6>[    1.020713] usb_function_register: name = 'adb',  map = 5
<6>[    1.020793] usb_function_register: name = 'diag',  map = 6
<6>[    1.021386] usb_function_register: name = 'modem',  map = 2
<3>[    1.021400] usb_function_register: unsupported function = ethernet
<6>[    1.021413] cdcecm init:usb function register failed
<6>[    1.021980] usb_function_register: name = 'mdlm',  map = 1
<6>[    1.022686] usb_function_register: name = 'obex',  map = 0
<6>[    1.023240] usb_function_register: name = 'mtp',  map = 4
<6>[    1.023986] usb_function_register: name = 'mass_storage',  map = 3
<6>[    1.024006] usb_set_composition: composition set to product id = 9337
<3>[    1.024766] msm_hsusb_is_serial_num_null: rpc call success
<3>[    1.025533] msm_hsusb_send_serial_number: rpc call failed! error: -22
<3>[    1.026700] msm_hsusb_send_productID: rpc call success
<6>[    1.026713] msm_hsusb: functions bound. starting.
<6>[    1.026726] usb_bind_func() (mass_storage)
<6>[    1.028253] msm_hsusb_enable_ldo_off
<6>[    1.028440] usb_start: pm_app_rpc connect success
<6>[    1.029520] usb_start:PMIC VBUS SN notif supported
<7>[    1.030160] [ShKey]Init(PID:1)
<7>[    1.030206] [ShKey]Probe(PID:1)
<6>[    1.030406] SH_qwerty_key 0-0044: Detected SH_qwerty_key, attempting to initialize keyboard
<6>[    1.030533] msm_hsusb_enable_ldo_off
<6>[    1.031660] input: msm_touchscreen as /devices/platform/msm_touchscreen.0/input/input0
<6>[    1.032326] SH_touchpanel 0-0015: Detected SH_touchpanel, attempting to initialize
<3>[    1.033280] gpiomatrix: gpio_request failed for output 41
<3>[    1.033293] gpio_event_probe: function failed
<4>[    1.033320] gpio-event: probe of gpio-event failed with error -16
<7>[    1.034080] RTC Registering with rs30000048:00010000
<7>[    1.035120] msm_rtc: dev (254:0)
<6>[    1.035166] rs30000048:00010000 rs30000048:00010000: rtc core: registered msm_rtc as rtc0
<7>[    1.035500] msm_rtc_secure: dev (254:1)
<6>[    1.035520] rs30000048:00010000 rs30000048:00010000: rtc core: registered msm_rtc_secure as rtc1
<6>[    1.035673] i2c /dev entries driver
<6>[    1.058373] input: compass as /devices/virtual/input/input1
<3>[    1.060686] msm_batt_init_rpc: rpc connect failed for CHG_RPC_PROG. rc = -113
<3>[    1.060706] msm_batt_init: msm_batt_init_rpc Failed  rc=-113
<6>[    1.060720] msm_batt_send_event() : Cleanup event ocurred.events = 00000004
<6>[    1.060740] msm_batt_send_event(): Battery call Back thread not Started.<6>Bluetooth: HCI UART driver ver 2.2
<6>[    1.060786] Bluetooth: HCI H4 protocol initialized
<3>[    1.061766] mmc0: No card detect facilities available
<6>[    1.062146] mmc0: Qualcomm MSM SDCC at 0x00000000a0400000 irq 26,0 dma 8
<6>[    1.062160] mmc0: 8 bit data mode disabled
<6>[    1.062166] mmc0: 4 bit data mode enabled
<6>[    1.062180] mmc0: polling status mode disabled
<6>[    1.062193] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 64000000 Hz
<6>[    1.062206] mmc0: Slot eject status = 0
<6>[    1.062220] mmc0: Power save feature enable = 1
<6>[    1.062233] mmc0: DM non-cached buffer at ffa09000, dma_addr 0x2e533000
<6>[    1.062246] mmc0: DM cmd busaddr 0x2e533000, cmdptr busaddr 0x2e533300
<3>[    1.062686] mmc1: No card detect facilities available
<6>[    1.062726] msmsdcc_platform_sdiowakeup_irq: SDIO Wake up IRQ : 117
<6>[    1.062886] mmc0 mmc_rescan detect a newly inserted card
<6>[    1.063420] mmc1: Qualcomm MSM SDCC at 0x00000000a0300000 irq 24,0 dma 8
<6>[    1.063433] mmc1: 8 bit data mode disabled
<6>[    1.063440] mmc1: 4 bit data mode enabled
<6>[    1.063453] mmc1: polling status mode disabled
<6>[    1.063466] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 64000000 Hz
<6>[    1.063480] mmc1: Slot eject status = 0
<6>[    1.063493] mmc1: Power save feature enable = 1
<6>[    1.063506] mmc1: DM non-cached buffer at ffa0a000, dma_addr 0x2e536000
<6>[    1.063520] mmc1: DM cmd busaddr 0x2e536000, cmdptr busaddr 0x2e536300
<6>[    1.064220] Registered led device: keyboard-backlight
<6>[    1.066720] logger: created 64K log 'log_main'
<6>[    1.067053] logger: created 256K log 'log_events'
<6>[    1.067360] logger: created 64K log 'log_radio'
<3>[    1.071413] [bwpm] Bluetooth/Wifi Power Management
<6>[    1.104186] mmc0 mmc_rescan search SDIO card
<3>[    1.105020] mmc0: Command timeout(CMD = 5, ARG = 0x00000000)
<3>[    1.110833] mmc0: Command timeout(CMD = 5, ARG = 0x00000000)
<3>[    1.115906] [bwpm] bwpm_bluetooth_on: RF ON
<3>[    1.116646] [bwpm] bwpm_bluetooth_on: Normal-Power-mode
<3>[    1.116666] mmc0: Command timeout(CMD = 5, ARG = 0x00000000)
<3>[    1.121713] [bwpm] bwpm_bluetooth_on: change status (0->1)
<3>[    1.122493] mmc0: Command timeout(CMD = 5, ARG = 0x00000000)
<6>[    1.127533] mmc0 mmc_rescan search SD card
<4>[    1.133073] success shfsinit_init.
<6>[    1.135460] stheno is loaded
<6>[    1.135466] major = 254
<6>[    1.135686] Advanced Linux Sound Architecture Driver Version 1.0.18a.
<4>[    1.136393] No device for DAI CODEC_DAI
<4>[    1.136406] No device for DAI CPU_DAI
<3>[    1.136780] msm_soc: create pcms
<6>[    1.136893] asoc: CODEC_DAI <-> CPU_DAI mapping ok
<6>[    1.138020] ALSA device list:
<6>[    1.138033]   #0: qsd-audio (MSM-CARD)
<4>[    1.138046] Netfilter messages via NETLINK v0.30.
<6>[    1.138200] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    1.138240] TCP cubic registered
<6>[    1.138253] NET: Registered protocol family 17
<6>[    1.138286] Bluetooth: L2CAP ver 2.13
<6>[    1.138293] Bluetooth: L2CAP socket layer initialized
<6>[    1.138313] Bluetooth: SCO (Voice Link) ver 0.6
<6>[    1.138326] Bluetooth: SCO socket layer initialized
<6>[    1.138440] Bluetooth: RFCOMM socket layer initialized
<6>[    1.138493] Bluetooth: RFCOMM TTY layer initialized
<6>[    1.138500] Bluetooth: RFCOMM ver 1.11
<6>[    1.138513] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[    1.138526] Bluetooth: BNEP filters: protocol multicast
<6>[    1.138540] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[    1.139180] RPC: Registered udp transport module.
<6>[    1.139193] RPC: Registered tcp transport module.
<6>[    1.139940] clock_late_init() disabled 20 unused clocks
<6>[    1.141613] input: SH_pm_key as /devices/virtual/input/input2
<6>[    1.142580] input: SH_headset_key as /devices/virtual/input/input3
<6>[    1.143680] input: 8k_handset as /devices/virtual/input/input4
<6>[    1.150320] smsm_entry 7, new intr_mask 0
<6>[    1.150340] smsm_entry 6, new intr_mask 0
<6>[    1.150460] VFP support v0.3: implementor 51 architecture 0 part 0f variant 0 rev 1
<6>[    1.156246] [drm] Initialized kgsl 2.0.0 20090810 on minor 0
<6>[    1.156753] msm_v4l2: msm_v4l2_init
<6>[    1.158153] rs30000048:00010000 rs30000048:00010000: setting system clock to 2010-09-22 17:13:19 UTC (1285175599)
<6>[    1.158213] Freeing init memory: 160K
<4>[    1.158260] Warning: unable to open an initial console.
<6>[    1.159426] init: reading config file
<3>[    1.160506] init: /init.rc: 345: invalid option 'busybox'
<6>[    1.161026] init: device init
<4>[    1.230306] mmc0: host does not support reading read-only switch. assuming write-enable.
<6>[    1.230326] mmc0: new high speed SDHC card at address b57b
<6>[    1.230993] mmcblk0: mmc0:b57b SD04G 3.69 GiB
<6>[    1.231166]  mmcblk0: unknown partition table
<6>[    1.234466] mmcblk mmc0:b57b: Card claimed for testing.
<6>[    1.234486] mmc1 mmc_rescan detect a newly inserted card
<6>[    1.241073] hsusb: IDLE -> ONLINE
<3>[    1.274460] mmc1: Command timeout(CMD = 8, ARG = 0x000001AA)
<6>[    1.279553] mmc1 mmc_rescan search SDIO card
<3>[    1.280400] mmc1: Command timeout(CMD = 5, ARG = 0x00000000)
<3>[    1.286233] mmc1: Command timeout(CMD = 5, ARG = 0x00000000)
<3>[    1.292060] mmc1: Command timeout(CMD = 5, ARG = 0x00000000)
<3>[    1.297886] mmc1: Command timeout(CMD = 5, ARG = 0x00000000)
<6>[    1.302946] mmc1 mmc_rescan search SD card
<3>[    1.303780] mmc1: Command timeout(CMD = 55, ARG = 0x00000000)
<3>[    1.309733] mmc1: Command timeout(CMD = 55, ARG = 0x00000000)
<3>[    1.315693] mmc1: Command timeout(CMD = 55, ARG = 0x00000000)
<3>[    1.321693] mmc1: Command timeout(CMD = 55, ARG = 0x00000000)
<6>[    1.326786] mmc1 mmc_rescan search MMC card
<3>[    1.327620] mmc1: Command timeout(CMD = 1, ARG = 0x00000000)
<4>[    1.340880] smd_shdiag_open
<4>[    1.340893] smd_shdiag_read
<4>[    1.340900] smd_shdiag_release
<4>[    1.340920] smd_support_open
<4>[    1.340926] smd_support_read
<4>[    1.340933] smd_support_release
<5>[    1.340953] init: property_init
<5>[    1.341306] init: property_get
<5>[    1.341320] init: open /dev/console
<4>[    1.341400] shfsinit_read
<5>[    1.383246] init: [init.rc] init trigger start
<6>[    1.383273] init: processing action 0x2ce58 (init)
<6>[    1.383300] init: command 'sysclktz' r=0
<6>[    1.383313] init: command 'loglevel' r=0
<6>[    1.383326] init: command 'export' r=0
<6>[    1.383340] init: command 'export' r=0
<6>[    1.383353] init: command 'export' r=0
<6>[    1.383366] init: command 'export' r=0
<6>[    1.383380] init: command 'export' r=0
<6>[    1.383393] init: command 'export' r=0
<6>[    1.383406] init: command 'export' r=0
<6>[    1.383413] init: command 'export' r=0
<6>[    1.383433] init: command 'export' r=0
<6>[    1.383486] init: command 'symlink' r=0
<6>[    1.383526] init: command 'mkdir' r=0
<6>[    1.383553] init: command 'mkdir' r=0
<6>[    1.383573] init: command 'mkdir' r=-17
<6>[    1.383600] init: command 'mkdir' r=0
<6>[    1.383626] init: command 'mkdir' r=0
<6>[    1.383646] init: command 'mkdir' r=0
<5>[    1.383660] init: [mount] tmpfs <5>init: ret:0
<6>[    1.383880] init: command 'mount' r=0
<6>[    1.383913] init: command 'mkdir' r=0
<5>[    1.383920] init: [mount] tmpfs <5>init: ret:0
<6>[    1.384053] init: command 'mount' r=0
<6>[    1.384086] init: command 'mkdir' r=0
<5>[    1.384093] init: [mount] tmpfs <5>init: ret:0
<6>[    1.384213] init: command 'mount' r=0
<6>[    1.384240] init: command 'mkdir' r=0
<5>[    1.384253] init: [mount] tmpfs <5>init: ret:0
<6>[    1.384366] init: command 'mount' r=0
<6>[    1.384393] init: command 'mkdir' r=0
<5>[    1.384406] init: [mount] tmpfs <5>init: ret:0
<6>[    1.384520] init: command 'mount' r=0
<6>[    1.384566] init: command 'mkdir' r=0
<6>[    1.384666] init: mtd partition 0, boot
<6>[    1.384686] init: mtd partition 1, cache
<6>[    1.384700] init: mtd partition 2, recovery
<6>[    1.384720] init: mtd partition 3, splash
<6>[    1.384733] init: mtd partition 4, ipl
<6>[    1.384746] init: mtd partition 5, system
<6>[    1.384760] init: mtd partition 6, log
<6>[    1.384773] init: mtd partition 7, userdata
<5>[    1.384800] init: [mount] /dev/block/mtdblock7 <6>yaffs: dev is 32505863 name is "mtdblock7"
<6>[    1.384953] yaffs: passed flags ""
<4>[    1.384960] yaffs: Attempting MTD mount on 31.7, "mtdblock7"
<4>[    1.387053] yaffs: restored from checkpoint
<4>[    1.387080] yaffs_read_super: isCheckpointed 1
<5>[    1.387106] init: ret:0
<6>[    1.387120] init: command 'mount' r=0
<6>[    1.390320] init: command 'chown' r=0
<6>[    1.391013] init: command 'chmod' r=0
<6>[    1.391053] init: command 'mkdir' r=0
<5>[    1.391066] init: [mount] tmpfs <5>init: ret:0
<6>[    1.391226] init: command 'mount' r=0
<5>[    1.391233] init: [mount] rootfs <5>init: ret:0
<6>[    1.391360] init: command 'mount' r=0
<6>[    1.391466] init: command 'write' r=0
<6>[    1.391520] init: command 'write' r=-1
<6>[    1.391566] init: command 'write' r=0
<6>[    1.391600] init: command 'write' r=-1
<6>[    1.391633] init: command 'write' r=-1
<6>[    1.391666] init: command 'write' r=0
<6>[    1.391693] init: command 'mkdir' r=0
<5>[    1.391706] init: [mount] none <5>init: ret:-1
<6>[    1.392080] init: command 'mount' r=-1
<6>[    1.392120] init: command 'chown' r=0
<6>[    1.392140] init: command 'chown' r=-2
<6>[    1.392160] init: command 'chmod' r=-2
<6>[    1.392240] init: command 'write' r=0
<6>[    1.392266] init: command 'mkdir' r=0
<6>[    1.392286] init: command 'chown' r=-2
<6>[    1.392306] init: command 'chmod' r=-2
<6>[    1.392353] init: command 'write' r=0
<6>[    1.392380] init: command 'mkdir' r=0
<6>[    1.392400] init: command 'chown' r=-2
<6>[    1.392420] init: command 'chmod' r=-2
<6>[    1.392480] init: command 'write' r=0
<5>[    1.392493] init: [mount] /dev/block/mtdblock5 <6>yaffs: dev is 32505861 name is "mtdblock5"
<6>[    1.392660] yaffs: passed flags ""
<4>[    1.392673] yaffs: Attempting MTD mount on 31.5, "mtdblock5"
<7>[    1.630080] [ShKey]Connect2InputSys(PID:4)
<7>[    1.630093] [ShKey]CreateInputDev(PID:4)
<6>[    1.630466] input: SH_qwerty_key as /devices/virtual/input/input5
<7>[    1.630486] [ShKey]OpenCB(PID:4)
<7>[    1.630500] [ShKey]Start(PID:4)
<6>[    1.634826] input: SH_touchpanel as /devices/virtual/input/input6
<6>[    1.741260] msm_chg_usb_charger_connected
<6>[    1.741280]
<6>[    1.741280] usb_chg_legacy_detect: Standard Downstream Port
<4>[   11.975073] yaffs_read_super: isCheckpointed 0
<5>[   11.975139] init: ret:0
<6>[   11.975159] init: command 'mount' r=0
<5>[   11.975173] init: [mount] /dev/block/mmcblk0p1 <6>kjournald starting.  Commit interval 5 seconds
<6>[   33.342393] EXT3 FS on mmcblk0p1, internal journal
<7>[   33.342433] ext3_orphan_cleanup: deleting unreferenced inode 217122
<7>[   33.343719] ext3_orphan_cleanup: deleting unreferenced inode 115716
<6>[   33.343753] EXT3-fs: mmcblk0p1: 2 orphan inodes deleted
<6>[   33.343766] EXT3-fs: recovery complete.
<6>[   33.626146] EXT3-fs: mounted filesystem with ordered data mode.
<5>[   33.626213] init: ret:0
<5>[   33.626346] init: free_size:3250007KB
<5>[   33.626413] init: sub access ok
・・・
カテゴリー: プログラム, モバイル タグ: , パーマリンク

コメントを残す

メールアドレスが公開されることはありません。 が付いている欄は必須項目です